Product Center
LY1200GH/L-T
Stable and reliable, cost-effective
Natural gas genset
- Genset size（For the transportation size of genset, the components set separately must be considaered separately）
Length(1) 5300mm
Width(1) 1700mm
Height(1) 2300mm
- Engine technical specifications
Cylinders 12
Bore / Stroke170mm/195mm
Displacement 53.1dm3
Rotating Speed 1500rpm
Mean Piston Speed 9.75m/s
Ac Of Lube Oil0.2g/kW·h
- Genset technical parameters
Genset ModelLY1200GH/L-T
Electrical Power(2)1100kW
Fuel Consumption 2683kW
Electrical Efficiency(3) 41.0%
Thermal Efficiency 45.1%
Nox(4) ≤500mg/Nm3
1.For the transportation size of genset, the components set separately must be considered separately
2.Refers to ISO3046/1, 50Hz Generator U=10kV，Cosphi=1.0, the minimum methane number of natural gas is MN70
3.Refers to ISO8525-1, 50Hz Generator U=10kV，Cosphi=1.0, the minimum methane number of natural gas is MN70
4.NOX emission: NOX≤0.5g NO2/Nm3(Content of dry exhaust gas in 5% O2)
For special gas and dual fuel gas applications, please consult our staff. The data herein are for reference only and not as binding value.
LY1200 unit features and advantages
-
Adapt to Low Calorific Value Gases
Efficiency reaches 41%, and comprehensive utilization rate of energy is over 86%; Annual operational time reaches reach up to 8000 hours; Long period of overhaul maintenance, low consumption of lubricant, low cost of operation and maintenance; Low emission with a dual guarantee for economical efficiency and environmental protection. -
High Applicability of Concentration Variation
Electric hybrid technology based on combustion regime;
Optimized air-fuel ratio algorithm;
Dual-regulation of gas and air, applicable to concentration of a large fluctuation;
Rapid follow-up and response with a high reliability.
-
Adapt to Low Calorific Value Gases
Air inlet channel with a low flow resistance;
Adapt to methane concentration of 8% at minimum;
Industrial ECU with an Auto-Fit main control unit;
Output power and stability are invariable.
-
Design of High Reliability
Advanced finite element analysis technology, ensuring a high-efficient operation under a variation of gas quality;
High-speed set with a stable operation and greatly improved reliability;
Low-temperature emission reduces thermal load of piston, gas valve and booster;
Separation design for strong and weak electricity avoids control intervention with an advanced technique, small volume and compact structure.
